Sewer design app 5.0
Continue to app
Paid Version
Publisher Description
Calculate the needed diameter and slope for a sewer pipe. Then you can change again slope and diameter and recalculate. The Manning Equation is used for Calculation of Pipe Diameter and Slope. Input data are design flow, desired tractive force, elevations of ground initial and final. The app can be used in the SI or US units. Example: The design flow rate for a section of storm sewer between two manholes is: Qdes = 10 l/s. Find a combination of a standard pipe diameter and pipe slope to use for this section of sewer to meet the criteria of minimun tractive force. The required minimum tractive force for sanitary sewer is 2 N/m2. See solution of example in the screenshot. - Initial ground elevation = 10 m (ground elevation of initial and final manholes is used to calculate the ground slope and check that slope of the pipe is not less than ground). - Final ground elevation = 9 m - Length of pipe = 60 m - Desired flow = 40 liters per seconds - Desired tractive force = 2 N/m2 And as a result of the design, after pressing the calculate button, we get the following results: Slope (Slope), Pipe diameter, height of water in the pipe (depth / diameter), Velocity and froude number The slope and diameter can be modified in the result and calculate again.
Requires iOS 5.0 or later. Compatible with iPhone, iPad, and iPod touch.
About Sewer design app
Sewer design app is a paid app for iOS published in the System Maintenance list of apps, part of System Utilities.
The company that develops Sewer design app is Alejandro Escandon. The latest version released by its developer is 5.0.
To install Sewer design app on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2013-01-11 and was downloaded 1 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the Sewer design app as malware if the download link is broken.
How to install Sewer design app on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the Sewer design app is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After Sewer design app is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
